Ṣàfikún àwọn àgbèwọlé àwọn àyọkà ìsàlẹ̀-ilà láti inú àwòrán

"P" and "B" sounds blast a puff of air at the mic, creating a low-frequency "pop" or thump. This tool removes the plosive energy without a pop filter, after the fact.

🎧

Ti fáìlì ìsàlẹ̀-ilà àti àwòrán wọlé

tabi

MP3, WAV, M4A, FLAC, OGG, AAC

Àwọn ìṣàmúlò-ètò 100%

Àwọn àgbègbè Àwọn ìṣàmúlò-ètò

Fi pàtó láti fi pamọ́ láti fi hàn àwọn ààyè-iṣẹ́ tí a tì fi àwòrán pamọ́.

Bii o ṣe n ṣiṣẹ

Plosives concentrate their energy in the low frequencies, below the voice's intelligible range. A targeted high-pass at ~100 Hz removes the pop's thump while leaving the consonant and the rest of the voice intact.

Ohun ti o dara fun

Àwọn àkọ́lé àìdálẹ̀ tí a fi pamọ́ látì fi àwọn àmì-ìwé àìdálẹ̀
Podcasting
Àwọn àkọ́lé àwọn àkọ́lé
Àwọn àgbékalẹ̀

Àwọn Àmì-ìwé

Àwọn Ìjánu-ìṣàmúlò-ètò: DSP
Àwọn ìrísí-lẹ́tà: MP3, WAV, M4A, FLAC, OGG, AAC
Àwọn Ìgúnrégé: Àwọn ààyè-iṣẹ́ àìfihàn

Àwọn Àtòjọ-ẹ̀yàn

Àwọn ìṣàmúlò-ètò Pop gbàdúrò láti fi àwọn àwọn ààyè-ìwé àwọn àwọn ààyè-ìwé pamọ́, àwọn ààyè-ìwé tí wọ́n tí wọ́n. Ó fi àwọn ààyè-ìwé pamọ́ tí wọ́n tí wọ́n lọ́wọ́lọ́wọ́.

They share a high-pass mechanism but are tuned differently: de-plosive targets the brief pop bursts, rumble removal targets continuous sub-bass vibration. Use whichever matches your problem.

Kò - ààyè tí a lè mọ̀ tí àwọn ìṣàmúlò-ètò náà ní o jú lọ; a tí yọ ìjánu-ì

High-pass ti wa ni ayika 100 Hz, sugbon awọn ọrọ ti o lagbara le padanu ẹmi ti o kere ju; nudge cutoff ti o kere ju ti abajade ba ni ifẹ ti o ni iwuwo.

Ya. Àwọn àgbègbè àgbègbè ní àwọn àgbègbè àìdálẹ̀

Kò ní GPU kan tí a fẹ́; o jẹ́ àwọn ìsàlẹ̀-ilà DSP tí o ní ìrànwọ́ tí o tí n ṣiṣẹ́ nínú àwọn ààyè àìfihàn.

Yà. Ìjádé àwọn ìṣàmúlò-ètò tí a bá fi ṣẹ́ nínú àwọn

Àwọn Àṣẹ

Background Noise Removal

Strip steady and shifting background noise — air conditioning, fans, street hum, room tone …

Wind Noise Removal

Wind hitting a microphone produces a broadband, gusting roar that simple filters can't track. …

Crowd & Babble Removal

Cafés, parties and busy streets bury a voice under overlapping chatter ("babble" noise). This …

Hiss & Tape-Hiss Removal

That constant high-frequency "sssss" from cheap mics, gain boosts and old cassette tapes is …

Mains Hum Removal (50/60 Hz)

A low buzzing drone under a recording is almost always mains hum — 50 …

Rumble & Low-Frequency Removal

Footsteps, traffic, HVAC and handling vibration dump energy below the voice as inaudible-but-destructive sub-bass …

Ṣàfikún àwọn àgbèwọlé àwọn àyọkà ìsàlẹ̀-ilà láti inú àwòrán

Bii o ṣe n ṣiṣẹ

Ohun ti o dara fun

Àwọn Àmì-ìwé

Àwọn Àtòjọ-ẹ̀yàn

Mo ti lo àwọn ìṣàmúlò-ètò POP - Mò fẹ́ yìí?

Àwòrán

Ńbí o tí fi àwọn ìṣàmúlò-ètò P àti B pamọ́?

Ń jẹ́ pé o tí ìgbà tí o tí ìbàlẹ̀?

Ń bá ṣiṣẹ́ láìpẹ̀lú ede?

Ǹjẹ́ o fẹ́ GPU tàbí àwọn àwọn ààtò àwọn ààtò?

Ṣe o lè ṣí àwọn àgbègbè nínú àwọn àwòrán tí a kọ́?